How to fix Network Protocols errors are Missing on Windows?

Follow the solutions below to fix network connection errors on Windows

While surfing the web, suddenly your computer is disconnected, while the network connection icon is still displayed normally. You try to edit it in many ways but there are still no positive signs and error messages "One or more network protocols are missing on this computer". Do not rush to call the repair party, please refer to the solutions we recommend to read in the article below.

Method 1: Disable the protection software that is being installed on Windows

Your computer is using 3rd party firewall software or Internet Security Suite software, try disabling it to improve the situation you are suffering from.

If you have normal Internet access, you should consider changing your connection settings to match or use more appropriate alternative security software.

Method 2: Update the Network Adapter driver

How long have you updated your network card driver? The problem may be that the network drive version is corrupted, outdated or incompatible with the network card. We should try to download the latest and suitable driver card version to proceed with the installation. Once done, check the results.

Method 3: Remove and reinstall the Network Adapter driver

This third option will address the situation where the latest version of the network driver cannot be upgraded.

Step 1:

Press Win + R key combination and enter devmgmt.msc command, press Enter.

Step 2:

Appearing Device Manager, double-click the left mouse button on the Network Adapter to bring up the extension.

Step 3:

Right-click on each drive that appears in it and select Uninstall.

Step 4:

When you have finished uninstalling all drive installations, select Action and Scan for hardware changes to reinstall the drives that are compatible with your computer's hardware device.

Remember to restart your computer to check for errors that have been fixed.

Method 4: Reset the Winsock Catalog

Step 1:

Start the Command Prompt in Administrator administration. Enter the netsh winsock reset command and press the Enter key.

Step 2:

Restart the computer to check the results.

Method 5: Change Internet Protocol Version Version 4 (TCP / IPv4)

Step 1:

Go to Network and Sharing Center and click on the connecting network.

Step 2:

The Status dialog box appears, select Properties and click Internet Protocol Version 4 (TCP / IPv4).

Step 3:

Mark Obtain an IP address automatically and enter DNS safely.

Method 6: Use the IPCONFIG statements to reconfigure the network

Step 1:

Access the Command Prompt in Administrator administration.

Step 2:

Enter the statements and end each statement with the Enter key.

netcfg -dipconfig /releaseipconfig /renewipconfig /flushdnsipconfig /registerdns

Method 7: Restore IP Configurations with Command Prompt command

Step 1:

Enter Regedit in the search and access section with Administrator rights.

Step 2:

After the Registry Editor table appears, access the following path: HKEY_LOCAL_MACHINESYSTEMControlSet001ControlNsi {eb004a00-9b1a-11d4-9123-0050047759bc} 26

Step 3:

Click on 26 and select Permission.

Step 4:

In Everyone, check the box Full Control at Allow. Click OK to save.

Step 5:

Open Command Prompt in Administrator administration. Enter netsh int ip reset command, press Enter key. Restart the computer and check the results.

Refer to the following article:

Hope the article will help you!